Set Ntp Update-Interval; Set Snmp Community - 3Com 3CRWX120695A Command Reference Manual

set ntp
update-interval
set snmp
community
Changes how often MSS sends queries to the NTP servers for updates.
Syntax —
set ntp update-interval seconds
— Number of seconds between queries. You can specify
seconds
from 16 through 1,024 seconds.
Default — The default NTP update interval is 64 seconds.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command changes the NTP update interval
to 128 seconds:
WX4400# set ntp update-interval 128
success: change accepted.
See Also
"clear ntp server" on page 113
"clear ntp update-interval" on page 113
"display ntp" on page 125
"set ntp" on page 147
"set ntp server" on page 148
Names the SNMP read and read-write communities, which allow remote
wireless LAN switches to access management information base (MIB)
objects on a WX switch.
Syntax —

set snmp community

comm-string
— Allows the specified community string read access only.
read-only
— Allows the specified community string read and write
read-write
access.
— Name of the SNMP community. Specify between 1
comm-string
and 256 alphanumeric characters, with no spaces.
Default — None.

set ntp update-interval

{read-only | read-write}
149