Hit-Sample-Rate - 3Com 3CRWX120695A Command Reference Manual

378 C 12: S
HAPTER ECURITY

hit-sample-rate

ACL C
OMMANDS
Table 71 Output of display security acl resource-usage (continued)
Field
In mapping
No VLAN or PORT
mapping
No VPORT mapping
Specifies the time interval, in seconds, at which the packet counter for
each security ACL is sampled for display. The counter counts the number
of packets filtered by the security ACL — or "hits."
Syntax —
hit-sample-rate seconds
— Number of seconds between samples. A sample rate of 0
seconds
(zero) disables the sample process.
Defaults — By default, the hits are not sampled.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To view counter results for a particular ACL, use the display
security acl info acl-name command. To view the hits for all security
ACLs, use the display security acl hits command.
Examples — The first command sets MSS to sample ACL hits every
15 seconds. The second and third commands display the results. The
Description
Application of security ACLs to incoming traffic on the WX
switch:
True — Security ACLs are mapped to incoming traffic.
False — No security ACLs are mapped to incoming
traffic.
Application of security ACLs to WX VLANs or ports on the
WX switch:
True — No security ACLs are mapped to VLANs or ports.
False — Security ACLs are mapped to VLANs or ports.
Application of security ACLs to WX virtual ports on the WX
switch:
True — No security ACLs are mapped to virtual ports.
False — Security ACLs are mapped to virtual ports.