Display Mobility-Profile - 3Com 3CRWX120695A Command Reference Manual

Id Clauses
----------------------------------------------------------------
1) deny if user eq *.theirfirm.com
2) permit vlan guest_1 if vlan neq *.wodefirm.com
3) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.wodefirm.com
display
mobility-profile
Examples — The following command displays the list of location policy
rules in the location policy on an WX switch:
WX4400 display location policy
See Also
"clear location policy" on page 171
"set location policy" on page 203
Displays the named Mobility Profile. If you do not specify a Mobility
Profile name, this command shows all Mobility Profile names and port
lists on the WX.
Syntax —
display mobility-profile [name]
— Name of an existing Mobility Profile.
name
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the Mobility Profile
magnolia:
WX1200# display mobility-profile magnolia
Mobility Profiles
Name
=========================
magnolia
See Also
"clear mobility-profile" on page 176
"set mobility-profile" on page 214
Ports
AP 2

display mobility-profile

185