Clear Spantree Portcost - 3Com 3CRWX120695A Command Reference Manual

Wireless lan mobility system wireless lan switch and controller

Hide thumbs Also See for 3CRWX120695A:

Table of Contents

clear spantree

Table 59 STP Commands by Usage (continued)

Convergence,

Resets to the default value the cost of a network port or ports on paths to

the STP root bridge in all VLANs on a WX switch.

clear spantree portcost port-list

— List of ports. The port cost is reset on the specified

Defaults — None.

Access — Enabled.

History — Introduced in MSS Version 3.0.

Usage — This command resets the cost in all VLANs. To reset the cost for

only specific VLANs, use the clear spantree portvlancost command.

Examples — The following command resets the STP port cost on ports 5

and 6 to the default value:

WX1200# clear spantree portcost 5-6

success: change accepted.

Chapters

Table of Contents

3crwx440095a