Set System Contact; Set System Countrycode; Set System Location; Display System - 3Com 3CRWX120695A Command Reference Manual

set system contact

set system
countrycode
Stores a contact name for the WX switch.
Syntax —
set system contact string
— Alphanumeric string up to 256 characters long, with no
string
blank spaces.
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
To view the system contact string, type the display system command.
Examples — The following command sets the system contact
information to tamara@example.com:
WX1200# set system contact tamara@example.com
success: change accepted.
See Also
"clear system" on page 39
"display system" on page 42
"set system location" on page 54
"set system name" on page 55
Defines the country-specific IEEE 802.11 regulations to enforce on the
WX switch.
Syntax —
set system countrycode code
— Two-letter code for the country of operation for the WX
code
switch. You can specify one of the codes listed in Table 8.
Table 8 Country Codes
Country
Australia
Austria
Code
AU
AT

set system contact

51