Autoboot - 3Com 3CRWX120695A Command Reference Manual

500 C 21: B
HAPTER OOT

autoboot

P C
ROMPT OMMANDS
Table 95 Boot Prompt Commands by Usage (continued)
Type
Boot Profile
Management, cont.
Diagnostics
Displays or changes the state of the autoboot option. The autoboot
option controls whether a WX switch automatically boots a system image
after initializing the hardware, following a system reset or power cycle.
Syntax —
autoboot [ON | on | OFF | off]
— Enables the autoboot option.
ON
— Same effect as
on
— Disables the autoboot option.
OFF
— Same effect as
off
Defaults — The autoboot option is enabled by default.
Access — Boot prompt.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the current setting of the
autoboot option:
boot> autoboot
The autoboot flag is on.
See Also
"boot" on page 501
Command
"next" on page 511
"change" on page 503
"delete" on page 505
"diag" on page 505
"test" on page 513
.
ON
.
OFF