3Com 3CRWX120695A Command Reference Manual page 181

user Nin
Password = 082c6c64060b (encrypted)
Filter-Id = acl-999.in
Filter-Id = acl-999.out
user last-resort-guestssid
Vlan-Name = k2
user last-resort-any
Vlan-Name = foo
mac-user 01:02:03:04:05:06
usergroup eastcoasters
session-timeout = 99
Table 38 describes the fields that can appear in display aaa output.
Table 38 display aaa Output
Field
Default Values
authport
acctport
timeout
acct-timeout
retrans
deadtime
key
author-pass
Radius Servers
Description
RADIUS default values for all parameters.
UDP port on the WX switch for transmission of RADIUS
authorization and authentication messages. The default
port is 1812.
UDP port on the WX switch for transmission of RADIUS
accounting records. The default is port 1813.
Number of seconds the WX switch waits for a RADIUS
server to respond before retransmitting. The default is
5 seconds.
Number of seconds the WX switch waits for a RADIUS
server to respond to an accounting request before
retransmitting. The default is 5 seconds.
Number of times the WX switch retransmits a message
before determining a RADIUS server unresponsive. The
default is 3 times.
Number of minutes the WX switch waits after determining
a RADIUS server is unresponsive before trying to reconnect
with this server. During the dead time, the RADIUS server
is ignored by the WX switch. The default is 0 minutes.
Shared secret key, or password, used to authenticate to a
RADIUS server. The default is no key.
Password used for outbound authentication to a RADIUS
server, used in conjunction with a last-resort username. By
default, a MAC user's MAC address is also used as that
user's password, and no global password is set.
Information about active RADIUS servers.
display aaa 181