Dhcp - NetComm NTC-220 User Manual

DHCP

DHCP relay configuration
In advanced networks configurations where the NTC-220 series router should not be responsible for DHCP
assignment, but instead an existing DHCP server is located on the Wireless WAN or LAN connections, the clients
behind the NTC-220 series router are able to communicate with the DHCP server when DHCP relay is enabled. This
enables the NTC-220 series router to accept client broadcast messages and to forward them onto another subnet.
To configure the router to act as a DHCP relay agent click the DHCP relay toggle key to turn it ON and enter the
DHCP server address into the DHCP server address field. DHCP relay is disabled by default.
DHCP configuration
You can manually set the start and end address range to be used to automatically assign addresses within, the
lease time of the assigned address, the default domain name suffix, primary and secondary DNS server, the
primary and secondary WINS server, as well as the advanced DHCP settings such as NTP, TFTP and Option
150/Option 160 (VoIP options).
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 49 – DHCP relay configuration
Figure 50 – DHCP configuration
45 of 193
© NetComm Wireless 2019