Configuring Your Router; Inserting The Sim Card; Setting Up The Cellular Router - NetComm NTC-5000 Series User Manual

Configuring your Router

You will need the following hardware components to set up the router:
Power supply (8-28VDC)
Ethernet cable
Laptop or PC
Active SIM card

2.1 Inserting the SIM card

Press the SIM 'Eject' button to eject SIM card bay. Make sure the SIM card is inserted correctly by inserting the SIM with the gold side
facing down on the SIM card bay and in the direction as shown below:

2.2 Setting up the cellular router

Attach the supplied antenna to the router by screwing it onto the antenna connector. Connect the power adapter to the mains and plug the
output into the power jack of the router.
The red power LED on the panel should illuminate.
Polarity of DC Power Plug (Screw Terminal)
YML5000
www.netcomm.com.au
NetComm CallDirect Series - NTC-5000 Series
Press the SIM
Eject button
Insert
SIM card
+VE -VE
+
-
NTC-5000 User Guide
9