I Cannot Seem To Get A Wireless Wan Connection; I Have Set The Band But Now It Does Not Show The Correct Frequency On The Home Page And I Cannot Get A Connection; The Sim Status Indicates That The Sim Is "Not Installed Or Reboot Required" On The Home Page - NetComm NTC-790 User Manual

I cannot seem to get a wireless WAN connection

11.2.5
•
Click on the Data Connection link on the HTML page and check that the APN is correct.
•
Also check that the username and password credentials are correct if the APN in use requires
these.
•
Make sure that Auto Connect is enabled on the PPP Profile Connect section on the Data
Connection page.
I have set the Band but now it does not show the correct Frequency on the
11.2.6
Home page and I cannot get a connection
If this happens you must reboot the Cellular Router. The Reset button on the home page will reboot the
Cellular Router.
The SIM status indicates that the SIM is "not installed or reboot required" on the
11.2.7
Home page
If a SIM is installed correctly this may indicate that the SIM has been removed or inserted whilst the unit is
powered up. In this case you must reboot the unit. The Reset button on the home page will reboot the
Cellular Router.
Revision 1.55
March 2009
61
NetComm Limited