Installing Your Device; Step 1: Insert The Sim Card; Step 2: Attach The Antennas - NetComm NTC-140-02 Quick Start Manual

Installing your device

Step 1: Insert the SIM card

Using a paper clip, press the SIM Eject button to eject the SIM card tray. Place the
SIM card in the tray and then insert the loaded tray into the SIM slot with the gold
side facing up, as shown below.
Insert
SIM
Card
Cellular Main

Step 2: Attach the antennas

The NTC-140-02 router is shipped with caps on the LTE and GPS antenna
sockets. To attach the supplied antennas, first remove the antenna socket caps
from the Main and Auxiliary antenna sockets by turning them in an anti-clockwise
direction, then screw the antennas onto the sockets by turning them in a
clockwise direction. Please refer to the
socket layout. If you have purchased a GPS antenna, remove the socket cap from
the GPS antenna socket and attach the antenna to the socket in the same manner.
Cellular Main
-
I/O
i +
USB
µSD
GPS
SIM
-
I/O
+
i
USB
Device overview
µSD
GPS
SIM
NTC-140-02 - 4G M2M Router
LAN LAN/WAN
Cellular AUX
LAN LAN/WAN
section for the antenna
Cellular AUX
Press the SIM
Eject Button
Remove caps
then screw
antennas on
7