Restore Factory Default Setting - NetComm NB9 Quick Start Manual

Hide thumbs Also See for NB9:

Table of Contents

Restore Factory Default Setting

Restore Factory Defaults will reset the NB9/NB9W to its factory default conﬁguration. Occasions

may present themselves where you need to restore the factory defaults on your NB9/NB9W such as:

•

You have lost your username and password and are unable to login to your NB9/

NB9W's web conﬁguration page;

•

You have purchased your NB9/NB9W from someone else and need to reconﬁgure the

device to work with your ISP;

•

You are asked to perform a factory reset by NetComm Support staff

In order to restore your NB9/NB9W to its factory default settings, please follow these steps:

•

Ensure that your NB9/NB9W is powered on (for at least 10 seconds);

•

Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At

this point, the reset is in progress. Do not power off the unit at this point;

•

When indicator lights return to steady green, reset is complete. The default settings are

now restored. The entire process takes about 45 seconds to complete;

•

Once you have reset your NB9/NB9W to its default settings you will be able to access

the device's conﬁguration web interface using http://192.168.1.1 with username 'admin'

and password 'admin';

NB9/NB9W ADSL2+ VoIP Router

YML789 Rev1

Table of Contents

Nb9w