Table of Contents
Advertisement
e)
Enter the MAC address of the computer/device you are connecting to the router. The MAC address os a 12 character set
of numbers and letters (A-F), with every 2 characters separated by a colon.
f)
Enter the IP address of the computer/device. This is the local address in the range of 192.168.1.x where x = a number
between 2 and 254.
g)
Click the Apply/Save button.
h)
Complete steps 4 through 7 for each device connected to the NF10W router. Each entry will be listed in the Static IP
Lease List as shown below.
QoS Configuration Settings
a)
Select Advanced Setup > Quality of Service
www.netcommwireless.com
v1.1
NetComm Wireless NF10W User Guide
66
Hide quick links:
Advertisement
Table of Contents
