Ipv6 - NetComm NF13ACV User Manual

IPv6

The IPv6 page allows you to configure IPv6 settings, if supported by your Internet Service Provider. To access the IPv6 page, click
on the Services menu at the top of the screen then click on the IPv6 menu item on the left.
OPTION
Option
Connection type
Primary DNS Address
Secondary DNS Address
LAN IPv6 Address
LAN IPv6 Link-Local Address
Autoconfiguration
Autoconfiguration type
Router Advertisement Lifetime
NetComm Wireless AC1200 WiFi Gigabit Router with Voice
50
Figure 48 - IPv6
Select to enable or disable IPv6 functionality.
Select the type of IPv6 connection to use for your service. You can select from:

Static IPv6

DHCPv6

PPPoE

6 to 4

IPv6 in IPv4 Tunnel
Select the type of connection as required by your Internet Service Provider for their IPv6 service.
Enter the Primary DNS Address for the IPv6 connection.
Enter the Secondary DNS Address for the IPv6 connection.
The IP Address to use for the IPv6 service connection.
The current local LAN IPv6 address of the router.
Select to enable or disable IPv6 auto configuration (if supported by your Internet Service Provider).
Select the appropriate type of auto configuration mode as required by your Internet Service Provider for their IPv6 service.
Enter the length of time between the router advertising its availability on the IPv6 connection.
DEFINITION
Table 16 - IPv6
www.netcommwireless.com
UM-00013 v1.0