O E Profile; Introduction To Poe Profile; Poe Profile Configuration - 3Com 4210 PWR Configuration Manual

32
Introduction to PoE
Profile
PoE Profile
Configuration
Configuring PoE Profile
P E P
O ROFILE
On a large-sized network or a network with mobile users, to help network
administrators monitor the switch's PoE features , the Switch 4210 provides the
PoE profile features. A PoE profile is a set of PoE configurations, including multiple
PoE features.
Features of PoE profile:
Various PoE profiles can be created. PoE policy configurations applicable to
■
different user groups are stored in the corresponding PoE profiles. These PoE
profiles can be applied to the ports used by the corresponding user groups.
When users connect a PD to a PoE-profile-enabled port, the PoE configurations
■
in the PoE profile will be enabled on the port.
Table 270 Configure PoE profile
Operation
Enter system view
Create a PoE profile and enter PoE profile view poe-profile
Configure the Enable the PoE feature on a
relevant port
features in PoE
profile Configure PoE mode for
Ethernet ports
Configure the PoE priority
for Ethernet ports
Configure the maximum
power for Ethernet ports
Quit system view
C
ONFIGURATION
Command
system-view
profilename
poe enable
poe mode { signal |
spare }
poe priority { critical |
high | low }
poe max-power
max-power
quit
Description
-
Required
If the PoE file is
created, you will
enter PoE profile
view directly
through the
command.
Required
Disabled by default.
Optional
signal by default.
Optional
low by default.
Optional
15,400 mW by
default.
-