Table of Contents
Advertisement
16
Advanced Software Features
Blanking Frequency and Amplitude Information on the Phase Noise Graph
Blanking Frequency and Amplitude Information on the Phase Noise
Graph
Security Level
Procedure
16-14
E5500 Phase Noise Measurement System Version A.02.00
CAUTION:
Implementing either of the ''secured'' levels described in this
section is not reversible. Once the frequency or frequency/amplitude data has
been blanked, it can not be recovered. If you need a permanent copy of the data,
you can print out the graph and parameter summary before you secure the data
and store the printed data to a secured location.
NOTE: An alternate method of storing classified data is to save the
measurement test file (*.pnm), including the real
frequency/amplitude data onto a floppy diskette and securing the
diskette. It can then be recalled at a later data.
1
From the Define Menu, choose Security Level. See
Figure 16-10Navigate to Security Level
2
Choose one of the security options provided:
Figure
16-10.
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
