Introduction; Ordering Information; Restored Exchange Assemblies - Agilent Technologies 4263B LCR Service Manual

Assembly Replacement

Introduction

This chapter provides the 4263B replaceable parts lists, and the step by step disassembly
procedures for the major assemblies. Table 3-1 to Table 3-7 describe all the 4263B replaceable
parts. The gure section of Table 3-7 also shows the cable connections.

Ordering Information

To order a part listed in the replaceable parts lists, quote the Agilent Technologies part number,
indicate the quantity required, and address the order to the nearest Agilent Technologies oce.
To order a part that is not listed in the replaceable parts list, include the instrument model
number, complete instrument serial number, the description and function of the part, and the
quantity of parts required. Address the order to the nearest Agilent Technologies oce.

Restored Exchange Assemblies

Some replacement assemblies are available as either new or restored assemblies. The restored
assembly is more economical than a new assembly and, as with new assemblies, a 90-day
warranty applies through the instrument's support life. The defective assembly must be
returned for credit. For this reason, new assemblies must be ordered for spare parts. The part
numbers for both new and restored assemblies are given in the replaceable parts lists.
Note
The Exchange Program may not apply in your country. Contact the nearest
Agilent Technologies oce for further details.
3
Assembly Replacement 3-1