Set Data Transfer Format
Line 190 tells the analyzer to use the ASCII transfer format.
Read Data
retrieves DATA TRACE ARRAYS, and
In line 210 and 230, you must choose
ll the array (which is 801 as declared in line 180).
What are other data
arrays?
to allow for an insucient number of data points to
You can retrieve the following data arrays, exchanging GPIB
command
command, see the
GPIB Command Reference
RAW DATA ARRAYS
DATA ARRAYS
MEMORY ARRAYS
MEMORY TRACE ARRAYS
CALIBRATION COEFFICIENT
ARRAYS
SWEEP PARAMETER ARRAYS
retrieves sweep parameters.
in line 200. For details on each
Reading Measurement Data
manual.
4-5