To Adjust The Channel-To-Channel Skew; Connect The Logic Analyzer - Agilent Technologies 16517A User Reference

To Adjust the Channel-to-Channel Skew

Table 10-1 Equipment Required
Equipment
Calibration Module
BNC Coax Cable

Connect the Logic Analyzer

Connect one end of the BNC cable to the calibration output port on
1
the rear panel of the 16517A master board.
Connect the other end of the BNC cable to the BNC Signal Input of
2
the calibration module.
16517A Calibration Module
Critical Specification Recommended Agilent
Model/Part
No Substitutes 16517-63201
10503A
Qty
1
1
10–3