Customize the PNA Screen
You can customize your PNA screen by showing or hiding the following display elements. All of these selections
are made from the PNA Response > Display menu.
Status Bar
Display Labels
Marker Display
(Separate topic)
Tables
Toolbars
Data and Memory Trace
Title Bars
Minimize Application
See Also
Expanded display capabilities of the PNA-X
Pre-configured measurements and windows arrangements
Traces, Channels, and Windows on the PNA
See other 'Setup Measurements' topics
Status Bar
When enabled, the status bar is displayed along the bottom of the PNA screen. The primary status bar shows the
following:
Channel Trigger State
Active channel
Measurement parameter for the active trace
Trace Math
Error correction
for the active trace
Averaging Factor
for the active channel
Smoothing
Percentage
Transform
(On)
(Cont, Groups, Single, Hold)
229