Instrument Status Bar - Agilent Technologies ENA Series User Manual

Overview of Functions
Screen Area: Names and Functions of Parts

4. Instrument Status Bar

E5070/E5071AThe bar that displays the status of the entire instrument.
Figure 2-5 Instrument Status Bar
4-1. Instrument Message/Warning
Displays instrument messages and warnings. Instrument messages are displayed in gray
and warnings in red. For the meanings of the instrument messages and warnings, see
Appendix B, "Troubleshooting," on page 375
4-2. Measurement Status
Displays the measurement status of the E5070/E5071A.
Setup
Hold
Init
Man
Ext
Bus
Meas
4-3. VBA Status
Displays the state of the execution of the VBA program in the E5070/E5071A.
Run
Stop
4-4. External Reference Signal Phase Lock
When the frequency reference signal is input to the "8. External Reference Signal Input
Connector (Ref In)" on page 48 on the rear panel, and the measurement signal of the
38
Setup for measurement in progress
Measurement on hold (idling)
Measurement being initialized
The trigger source is set to "Manual" and waiting for
trigger.
The trigger source is set to "External" and waiting for
trigger.
The trigger source is set to "Bus" and waiting for trigger.
A measurement is in progress.
A VBA program is currently running.
A VBA program has stopped.
Chapter 2