12. Front Usb Port; 13. Ground Terminal - Agilent Technologies ENA Series User Manual

Overview of Functions
Front Panel: Names and Functions of Parts

12. Front USB Port

A USB (Universal Serial Bus) port (number of parts: 1) specifically for an ECal (Electronic
Calibration) module, a multiport test set or a printer. Connecting a designated ECal module
to this port enables ECal measurement to be performed. Connecting a designated printer to
this port enables screen information on the E5070/E5071A to be printed to the printer. For
more about executing ECal measurements, see Chapter 4, "Calibration," on page 77, and
for printing to a printer, see "Using a Printer to Output the Screen Image" on page 205. The
specifications of this port are identical to the "3. Rear USB port" on page 47.
NOTE
We do not support connections to the USB port of devices other than designated printers,
ECal modules and multiport test sets.

13. Ground Terminal

Connected to the chassis of the E5070/E5071A. You can connect a banana type plug to this
terminal.
Chapter 2 33