Appendix A
Serial port
Allows the WireScope 350 or DualRemote 350 to connect to PCs or printers.
Connector is an 8-pin micro-DIN. Pin out:
Din 8 pin #
Signal
1
DTR
2
RXD
3
GND
4
NOT USED
5
TXD
6-8
NOT USED
USB-A port
WireScope 350 only. The USB-A port allows the WireScope 350 to connect to
USB peripherals. Provides up to 100 mA @ 5VDC for attached USB
peripherals.
USB-B port
WireScope 350 and DualRemote 350. The USB-B port allows the WireScope
350 or DualRemote 350 to connect to a PC equipped with a USB port.
Talkset connector (3.6 mm phone jack)
WireScope 350 and DualRemote 350. Supports two way voice communication
between WireScope DualRemote operators over cable run under test. Requires
Agilent Technologies talkset (Part Number N2605A-137) to operate.
CompactFlash™ card slot
Provides removable non-volatile storage for test result files. Supports any
standard CompactFlash™ Flash storage card. Densities as high as 192MB are
presently available. Data stored in standard format compatible with PCMCIA-
ATA specification.
DB9 pin #
DB25 pin #
4
20
2
3
5
7
3
2
Specifications 140