Special Displays - Agilent Technologies HP 1660E Series User Manual

Logic analyzers

Table of Contents

Triggering Examples

Special Displays

Interleaved trace lists

Interleaved trace lists allow you to view data captured by two analyzers

in a single display. When you interleave the traces, you see each state

that was captured by each analyzer. These states are shown on

consecutive lines.

You can interleave state listings from state analyzers when two are

used together in a run. Interleaved state listings are useful when you

are using multiple analyzers to look at interaction between two or more

processors. They are also useful when you need more analysis width

than is available in one analyzer.

Mixed Display mode

The Mixed Display mode allows you to show state listings and timing

waveforms together on screen. State listings are shown at the top of

the screen and waveform displays are shown at the bottom. You can

interleave state listings from two analyzers at the top of the screen, if

desired. You can display waveforms from the timing analyzer at the

bottom of the screen.