Format Command - Keysight Technologies BT2152B Operating And Service Manual

Format Command

FORMat:BORDer NORMal|SWAPped
FORMat:BORDer?
Used for binary block transfers only. Selects the byte order for binary block transfers using FETCh?
Parameter
NORMal|SWAPped,
*RST SWAP
Select the normal byte order: FORM:BORD NORM
In the NORMal byte order, the most-significant byte (MSB) of each data point is returned first and the
l
least significant byte is returned last.
In the SWAPped byte order the least-significant byte (LSB) of each data point is returned first and the
l
most significant byte is returned last.
The byte order setting is stored in non-volatile memory and does not change when power has been
l
turned off.
The most common setting for this command is SWAPped.
l
Keysight BT2152A/B Operating and Service Guide
4 Programming Reference
Typical Return
SWAP
79