Parameters; Dependencies - Keysight Technologies N5990A User Manual

Parameters

Dependencies

Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 51 Connection Diagram for Level Calibration, Into Open Data 0 (for N4903B +
DSGA)
The parameters used in Expert Mode for this calibration, are as follows:
• Oscilloscope Bandwidth
• Amplitude Range
• Offset Range
• Use Infiniisim
• Transfer Function Chan
• Filter Delay Chan1
• Max. Time Span Chan1
These parameters are listed in
No calibration is required for this procedure.
Table 6.
Calibrations 4
95