Default Timing; Default Sequences - Keysight Technologies N5990A User Manual

Default Timing

Default Sequences

Keysight N5990A MIPI M-PHY Receiver Test User Guide
Click Default Timing to display the Set M-PHY Default Timings window
(see Figure
Figure 16
This dialog lists all the M-PHY timing parameters. Each parameter value
can be selected and modified. Click Set Values to Default to reset all the
modifications and set all the timing parameters to their default value.
Click Default Sequences (see
Sequences panel (see
files for HS Sequence (Burst), HS Sequence (Cont), LS Sequence (Burst)
and Squelch Sequence test groups.
HS implies High Speed
NOTE
LS implies Low Speed
Cont implies Continuous
Sync Pattern
The D10.5 and D26.5 symbols are used as default for sync pattern.
16).
Set M-PHY Default Timings panel
Figure
Figure 17). In this panel, click Browse to select the
N5990A M-PHY Station
13) to display the Select M-PHY
2
45