Keysight Technologies N5990A User Manual page 267

Parameter Name
Result
PWM Data Rate
Tested Value
Min Spec
Max Spec
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 156 Example HTML Viewer for Test 2.2.8-PWM-RX Receive Ratio, PWM-G1
and Above (k
PWM-RX
Table 48 Test 2.2.8-PWM-RX Receive Ratio PWM-G1 and Above (kPWM-RX) Test data table
Parameter Description
"Pass" / "Fail" - If the value is "Fail", the PWM-RX Receive Ratio is between the spec limits.
It is the PWM data rate value in MBit/s.
It is value of the tested Receive Ratio.
It is the minimum bit duration value, where the DUT must work according to the specification.
It is the maximum bit duration value, where the DUT must work according to the specification.
)
PWM Tests 7
267