7
PWM Tests
Dependencies
Results
258
The calibrations required for this test are as follows:
•
Reference Clock Calibration
•
Level Calibration Terminated / Into Open
An example of a HTML Viewer for the Test 2.2.7a-PWM-RX Receive Bit
Duration Tolerance (TOL
The results comprise of the following:
•
The common parameter list (in Expert Mode)
•
A test data table (Refer to
Figure 152
Example HTML Viewer for Test 2.2.7a-PWM-RX Receive Bit Duration Tol-
erance (TOL
) Test
PWM-RX
Table 46
Test 2.2.7a-PWM-RX Receive Bit Duration Tolerance (TOL
) Test procedure is shown in
PWM-RX
Table
46)
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure
152.
) Test data table
PWM-RX