Keysight Technologies N5990A User Manual page 255

Parameter Name
Result
Max Passed Skew
Min Failed Skew
Min Spec Skew
Tested Amplitude
Tested Offset
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the DUT skew tolerance is below the spec limit.
It is the maximum skew value, where the DUT shows no errors.
It is the minimum skew value, where the DUT does not work.
It is the minimum skew value where the DUT must work according to the specification.
It is the amplitude value that is tested.
It is the offset value that is tested.
PWM Tests 7
255