Keysight Technologies N5990A User Manual page 243

Parameter Name
Result
PWM Data Rate
Amplitude
Offset
Min Passed Offset
Min Spec Offset
Max Passed Offset
Max Spec Offset
Error Count
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table 41 Test 2.2.3-PWM-RX Common-Mode Input Voltage Tolerance Test data table
Parameter Description
"Pass"/"Fail", if the value is "Fail", the amplitude tolerance value is below the spec limits.
It is the PWM data rate value in MBit/s.
It is value of the amplitude that is tested.
It is the offset value that is tested.
It is the minimum offset value, where the DUT works successfully.
It is the minimum offset value, where the DUT must work without error.
It is the maximum value of offset, where the DUT works successfully.
It is the maximum offset value, where the DUT must work without any error.
The number of errors that occurred during the test.
PWM Tests 7
243