Setup Procedure Fast
Purpose
Procedure
Connection Diagram
Parameters
Keysight N5990A MIPI M-PHY Receiver Test User Guide
It is available for all hardware configurations.
Figure 175
Setup Procedure Fast
If the Setup Procedure Full has been run, this procedure allows changing
some parameters that do not require a restart of the generator sequencer.
It sets the voltage and jitter values needed for the setup.
No special connection diagram is available, but it can be connected in the
same way as for Test 2.1.1- HS-RX Differential Input Voltage Amplitude
Test.
The parameters used in Expert Mode for this procedure, are as follows:
Manual Test Procedures
303
10