Keysight Technologies N5990A User Manual page 225

Parameter Name
Result
Squelch min T_SQ
Max Spec
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 136 Example HTML Viewer for Test 2.4.4-SQ-RX Squelch Exit Time Test
Table 37 Test 2.4.4-SQ-RX Squelch Exit Time Test data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the squelch exit pulse width is below the spec limits.
It is the pulse width value that causes the hibernate state exit.
It is the maximum pulse width value where the DUT should exit from the hibernate state.
Squelch Tests 6
225