Keysight Technologies N5990A User Manual page 290

9 Interference Tests
Parameter Name
Result
Interference Frequency
Measured Amplitude
290
Figure 169 Example HTML Viewer for Interference Calibration
Table 53 Interference Calibration data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the amplitude value could not be measured using a DSO or the
measured values do not have an increasing monotony.
The frequency value to be calibrated.
It is the amplitude value measured for the set value.
Keysight N5990A MIPI M-PHY Receiver Test User Guide