Sj Calibration; Purpose - Keysight Technologies N5990A User Manual

SJ Calibration

Purpose

Keysight N5990A MIPI M-PHY Receiver Test User Guide
This calibration is available for all hardware configurations.
Figure 71

SJ Calibration

It calibrates the low frequency SJ that is injected internally by the BERT.
This calibration is run once at each selected HS data rate (see
For spec 4.1, this calibration is only mandatory for B-series (for A-series,
the procedure is shown in the test tree as informative).
Calibrations 4
Figure 71).
125