Parameter Name
Result
Max Passed Skew
Min Failed Skew
Min Spec Skew
Tested Amplitude
Tested Offset
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 113
Example HTML Viewer for Test 2.1.6-HS-RX Lane-to-Lane Skew Test
Table 26
Test 2.1.6-HS-RX Lane-to-Lane Skew Test data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the DUT skew tolerance is below the spec limit.
It is the maximum skew value, where the DUT shows no errors.
It is the minimum skew value, where the DUT does not work.
It is the minimum skew value where the DUT must work according to the specification.
It is the differential voltage amplitude value that is tested
It is the common mode voltage value that is tested
HS Tests
5
181