Keysight Technologies N5990A User Manual page 89

Parameter Name
Result
Set Offset
Measured Offset
Set Amplitude
Measured Amplitude
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 42 Example HTML Viewer for Amplitude in Reference Clock Calibration
Table 7 Reference Clock Calibration data table
Parameter Description
"Pass"/"Fail". If the set-up is wrong, the calibration procedure fails due to the non-monotonic values
measured.
It is the set offset value for a given step.
It is the effective offset value as measured using a DSO with the histogram measurement.
It is the set amplitude value for a given step.
It is the effective amplitude value as measured using a DSO with the histogram measurement.
Calibrations 4
89