Connection Diagram
Multi-Channel without Switch
Keysight N5990A MIPI M-PHY Receiver Test User Guide
To display the connection diagram, right-click the desired test or
calibration and select Show Connection (see
connection diagram is displayed automatically when you start the selecetd
procedure.
Figure 31
Show Connection Diagrams
When the setup does not include a switch for multi-lane purposes, it is
necessary to connect each DUT lane to a different data channel output of
the pattern generator. In this case, the J-BERT M8020A system allows to
connect 1,2,3 or 4 data channels and the J-BERT N4903B 1 or 2 data
channels.
Figure 32
shows the data channels for the M8020A and
Figure 33
for the N4903B.
Calibrations and Test Procedures
Figure
31). Alternatively, the
3
67