Keysight Technologies N5990A User Manual page 165

Parameter Name
Result
Amplitude
Offset
Min Passed Offset
Min Spec Offset
Max Passed Offset
Max Spec Offset
Error Count
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 99 Example HTML Viewer for Test 2.1.3-HS-RX Common-Mode Input Voltage
Tolerance Test
Table 22 Test 2.1.3-HS-RX Common-Mode Input Voltage Tolerance Test data table
Parameter Description
"Pass"/"Fail" - If the amplitude tolerance is less than the spec limit, the value "Fail".
It is the value of the differential voltage amplitude to be tested.
It is the value of the common mode voltage to be tested.
It is the minimum common mode voltage value, where the DUT has no errors.
It is the minimum common mode voltage value where the DUT must work according to the specification.
It is the maximum common mode voltage value, where the DUT has no errors.
It is the maximum common mode voltage value, where the DUT must work according to the specification.
It is the number of error bits observed by the DUT.
HS Tests 5
165