Dependencies; Results - Keysight Technologies N5990A User Manual

Dependencies

Results

Keysight N5990A MIPI M-PHY Receiver Test User Guide
• Prepare Length
• Sleep Length
• Prepare Length Capability
• Test Sequence
• IBerReader Init Mode
• Lane Under Test Termination Model
These parameters are listed in alphabetical order in
The calibrations required for this test are as follows:
• Reference Clock Calibration
• Level Calibration Terminated / Into Open
An example of a HTML Viewer for the Test 2.3.4-SYS-RX Differential
Termination Enable Time (T
Figure 161. The results comprise of the following:
• The common parameter list (in Expert Mode).
• A test data table (Refer to
) test procedure is shown in
TERM-ON-SYS-RX
Table 51).
Sys Burst Tests 8
Table 6.
279