Keysight Technologies N5990A User Manual page 112

4 Calibrations
Parameter Name
Result
Set Jitter
Measured Jitter
112
Figure 64 Example HTML Viewer for Short Term RJ Calibration
Table 11 Short Term RJ Calibration data table
Parameter Description
"Pass"/"Fail" - If the set-up is wrong, the calibration procedure fails due to the non-monotonic values
measured.
It is the set value for the high frequency random jitter.
It is the measured value of the random jitter at each HS data rate.
Keysight N5990A MIPI M-PHY Receiver Test User Guide