Keysight Technologies N5990A User Manual page 108

4 Calibrations
Parameter Name
Result
Calibration Step
Measured ISI
Set Insertion Loss of Point 2 (dB)
Frequency of Point 2
108
Figure 62 Example HTML Viewer for Embedded Fixture ISI Calibration
Table 10 Embedded Fixture ISI Calibration data table
Parameter Description
"Pass"/"Fail" - If it is "Fail", the measured or obtained values are not monotonic.
The step number.
It is the ISI measured at each step.
The insertion loss that the M8020A sets in the second frequency point.
The frequency of the second point.
Keysight N5990A MIPI M-PHY Receiver Test User Guide