Keysight Technologies N5990A User Manual page 49

Keysight N5990A MIPI M-PHY Receiver Test User Guide
Figure 19
BER Settings
Select BER Reader
For automated receiver testing, it is necessary to determine whether the
DUT receives the data properly. This can be achieved by reading pass / fail
information from the device. The Bit Error Ratio (BER) is measured and
read. N5990A supports four different BER Reader implementations:
1 Bert Analyzer
2 Offline BER Reader
3 Unipro BER Reader
4 Custom BER Reader
Special Parameters Dialog
N5990A M-PHY Station 2
49