Isi (W/Switch) Calibration; Purpose - Keysight Technologies N5990A User Manual

ISI (w/Switch) Calibration

Purpose

Keysight N5990A MIPI M-PHY Receiver Test User Guide
This procedure is available for all hardware configurations.
Figure 54 ISI Calibration
The receiver test setup must include an ISI Compliance Channel, capable
of introducing a channel loss as defined in the M-PHY specification. This
procedure calibrates the ISI of the trace used for that purpose.
This calibration should run once at each data rate (see
Calibrations 4
Figure 54).
99