Keysight Technologies N5990A User Manual page 239

Parameter Name
Result
PWM Data Rate
Min Spec
Offset
Min Passed Amplitude
Min Spec Amplitude
Max Passed Amplitude
Max Spec Amplitude
Error Count
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table 40 Test 2.2.1-PWM-RX Differential Input Voltage Amplitude Test data table
Parameter Description
"Pass"/"Fail" - If the value is "Fail", the amplitude tolerance value is below the spec limits.
It is the PWM data rate value in MBit/s.
It is value of the amplitude that is tested.
It is the offset value that is tested.
It is the minimum amplitude value, where the DUT works successfully.
It is the minimum amplitude value, where the DUT must work without error.
It is the maximum value of amplitude, where the DUT works successfully.
It is the maximum amplitude value, where the DUT must work without any error.
The number of errors that occurred during the test.
PWM Tests 7
239