7
PWM Tests
Dependencies
Results
262
The calibrations required for this test are as follows:
•
Reference Clock Calibration
•
Level Calibration Terminated / Into Open
An example of a HTML Viewer for the Test 2.2.7b-PWM-RX Receive Bit
Duration Tolerance, During LINE-READ (TOL
shown in
Figure
154. The results comprise of the following:
•
The common parameter list (in Expert mode)
•
A test data table (Refer to
Figure 154
Example HTML Viewer for Test 2.2.7b-PWM-RX Receive Bit Duration Tol-
erance, During LINE-READ (TOL
Table 47
Test 2.2.7b-PWM-RX Receive Bit Duration Tolerance During LINE-READ (TOL
) Test data table
WM-G1-LR-RX
PWM-G1-RX
Table
47)
) Test
PWM-G1-LR-RX
Keysight N5990A MIPI M-PHY Receiver Test User Guide
) Test procedure is
P-