5
HS Tests
Dependencies
Results
190
•
IBerReader Init Mode
•
Test Sequence
•
Re-Init sequence after Reset DUT
•
Level Pairs
•
Tested Frequency Offset
•
Tested Range
These parameters are listed in alphabetical order in
The calibrations required for this test are as follows:
•
Reference Clock Calibration
•
Level Calibration Terminated
An example of a HTML Viewer for the Test 2.1.8-HS-RX Frequency Offset
Tolerance during HS-Burst Test procedure is shown in
results comprise of the following:
•
The common parameter list (in Expert Mode).
•
A test data table. Refer to
Table 28
for the parameter description.
Keysight N5990A MIPI M-PHY Receiver Test User Guide
Table
6.
Figure
117. The