Results
Parameter Name
Result
Data Rate
Measured Offset
Keysight N5990A MIPI M-PHY Receiver Test User Guide
An example of a HTML Viewer for the ISI Calibration procedure is shown in
Figure
66. The results comprise of the following:
•
A calibration data graph.
•
The common parameter list (in Expert Mode).
•
A data table for the ISI that is being calibrated (Refer to
Table 9
ISI Calibration data table
Parameter Description
"Pass"/"Fail" - If it is "Fail", the measured or obtained values are not monotonic.
HS data rate at which the ISI was calibrated.
It is the measured value of ISI.
Calibrations
4
Table
9).
103