Hs Tests - Keysight Technologies N5990A User Manual

Keysight N5990A MIPI M-PHY Receiver Test User Guide
5

HS Tests

Test 2.1.1- HS-RX Differential Input Voltage Amplitude Test
Test 2.1.2-HS-RX Accumulated Differential Input Voltage Tolerance Test
/ 156
Test 2.1.3-HS-RX Common Mode Input Voltage Tolerance Test
Test 2.1.4-HS-RX Differential Termination Enable Time
Test 2.1.5-HS-RX Differential Termination Disable Time
Test 2.1.6-HS-RX Lane-to-Lane Skew Test
Test 2.1.7 Receiver Jitter Tolerance Test
Test 2.1.8-HS-RX Frequency Offset Tolerance (fOFFSET-RX) during HS
Burst
Test 2.1.8b-HS-RX Frequency Offset (fOFFSET-RX) Tolerance during
HS-Continuous Mode Test
Test 2.1.9-HS-RX PREPARE Length Verification
Test 2.1.10-HS-RX Sync Length Verification
Jitter Sensitivity Test
Low Frequency Jitter Sensitivity Test
The MIPI M-PHY Specification document defines the requirements for the
M-PHY devices. In these requirements, the specification is included for
parameters such as:
•
•
•
•
•
/ 188
/ 204
Differential Input Voltage Amplitude (V
Accumulated Differential Input Voltage Amplitude (V
Common Mode Input Voltage Amplitude (V
Differential Termination Enable Time (T
Differential Termination Disable Time (T
/ 176
/ 182
/ 192
/ 196
/ 200
/ 209
)
DIF-RX
CM-RX
TERM-ON-RX
TERM-OFF-RX
/ 149
/ 162
/ 166
/ 172
)
DIF-ACC-RX
)
)
)