Keysight Technologies N5990A User Manual page 98

4 Calibrations
Parameter Name
Result
Set Offset
Measured Offset
Set Amplitude
Measured Amplitude
98
Parameter Description
"Pass"/"Fail"- If the set-up is wrong, the calibration procedure fails due to the non-monotonic values
measured.
It is the set offset value for a given step.
It is the effective offset value as measured using a DSO with the histogram measurement.
It is the set amplitude value for a given step.
It is the effective amplitude value as measured using a DSO with the histogram measurement.
Keysight N5990A MIPI M-PHY Receiver Test User Guide